Sample & Hold - Steinberg HALION4 Mode D'emploi

Option
Osc1/2/3 Level
Osc1/2/3 Multi
Detune
Osc1/2/3 Multi
Pan
Osc1/2/3 Multi
Voices
Osc1/2/3
Waveform
Sub Osc Level
Ring Mod Level
Noise Gen Level
Sample & Hold
The Sample & Hold modifier takes a sample of the modulation source whenever it
receives a trigger signal. It holds the sampled value until it receives a new trigger. This
way, you can quantize a continuous modulation signal. The Sample & Hold modifier
offers the following options:
Option
Trigger on Note On Select this to trigger the Sample & Hold modifier manually. Each
Trigger on LFO1
Trigger on LFO2
Trigger on
Modulation Wheel
Trigger on Sustain Select this to trigger the Sample & Hold modifier manually. Each
Sample until
Release
Using Global MIDI Controllers
HALion features eight global MIDI controllers ("Contr. A – Contr. H"), which can be
used as placeholders in the modulation matrix. With these controllers, you can remap
specific MIDI controllers to the placeholder controllers, for example, from the CC
Mapper. This allows you to use the global controller in several places and set up the
assignment only once.
Description
Modulates the volume of the corresponding oscillator. For example,
assign the modulation wheel to fade the oscillator in and out while
you play.
Modulates the detune of the individual oscillator voices produced
by multi-oscillator mode.
Modulates the pan position of the individual oscillator voices
produced by multi-oscillator mode.
Modulates the number of oscillator voices produced by multi-
oscillator mode.
Modulates the shape and character of the corresponding oscillator.
For example, assign one of the envelopes to change the character
of the oscillator over time.
Modulates the volume of the sub oscillator. For example, assign the
modulation wheel to fade in the oscillator while you play.
Modulates the volume of the ring modulation effect. For example,
assign the modulation wheel to fade in the ring modulation while
you play.
Modulates the volume of the noise generator. For example, assign
the modulation wheel to fade in the noise generator while you play.
Description
time you hit a key, the modifier takes a sample.
Select this for periodic triggering of the Sample & Hold modifier. It
takes a sample each time the waveform of LFO1 crosses the zero
line upwards.
Select this for periodic triggering of the Sample & Hold modifier. It
takes a sample each time the waveform of LFO2 crosses the zero
line upwards.
Select this to trigger the Sample & Hold modifier manually. It takes a
sample each time the modulation wheel passes the center position.
time you press the sustain pedal, the Sample & Hold modifier takes
a sample.
Select this to trigger the Sample & Hold modifier through releasing
a key. It constantly takes samples and holds the last sample when
receiving a note-off.
135
Editing Zones in the Sound Editor
The Modulation Matrix Section