Steinberg HALION4 Mode D'emploi page 142

Option Description
Layered on Root Key The zones are layered on the root key, equally spaced from the
lowest to the highest velocity.
Layered on Key Zones that have exactly the same key range are layered equally
Range spaced from the lowest to the highest velocity.
Chromatic from Last Starting with the highlighted key of the Mapping editor keyboard,
Key the zones are mapped chromatically to the white and black keys in
ascending order. The root keys are set to match the corresponding
key.
White Keys from Starting with the highlighted key of the Mapping editor keyboard,
Last Key the zones are mapped to the white keys in ascending order. The
root keys are set to match the corresponding key.
Black Keys from Last Starting with the highlighted key of the Mapping editor keyboard,
Key the zones are mapped to the black keys in ascending order. The
root keys are set to match the corresponding key.
Layered on Last Key On the highlighted key of the Mapping editor keyboard, the zones
are layered equally spaced from lowest to highest velocity. The root
keys are set to match the highlighted key.
Stacked on Last Key At the highlighted key of the Mapping editor keyboard, the zones
are stacked on each other. The root keys are set to match the
highlighted key.
Key Text in Sample The zones are mapped to the key that is extracted from the sample
Name file name. The function searches for the name of the key in text form,
for example, C#3. The mapping and root key are set to that key.
Key Number in The zones are mapped to the MIDI note number that is extracted
Sample Name from the sample file name. The function searches for a number, for
example, 61. The mapping and root key are set to that key.
Velocity in Layer The zones are mapped to the velocity range that is extracted from
Name the layer name.
Velocity in Sample The zones are mapped to the velocity range that is extracted from
Name the sample file name.
Velocity in Sample The zones are mapped to the velocity range that is extracted from
Folder the name of the sample folder.
Ranges in Sample The zones are mapped to the key and velocity ranges that are
File stored in the sample file's header chunk. If the header chunk of the
sample file contains no information, a message informs you that the
samples could not be mapped.
Only values between 0 and 127 can be extracted as MIDI note numbers or velocity
ranges. The smaller number is used as the lower limit and the higher number as the
upper limit, for example "Sample_Name_Range_90-127".
142
Mapping Zones
Mapping Zones