Steinberg HALION4 Mode D'emploi page 171

Control
Freq
Q (Quality)
• To adjust the parameters Gain and Freq simultaneously, drag the points in the EQ
curve display.
Graphic EQ
This equalizer has ten frequency bands that can be cut or boosted by up to 12dB with
a fader. In addition, there are general controls for setting the overall range and output
of the equalizer.
Output
This controls the overall output level of the equalizer.
Mode
The Mode option allows you to add color or character to the equalized output. The
following options are available:
Mode
True Response
Classic
Constant Q
Range
This adjusts the maximum cut or boost in dB for all frequency bands together.
Invert
Activate this to invert the EQ curve. The frequency bands that are boosted are cut,
and vice versa.
Flatten
Click this button to reset all frequency bands to 0 dB.
Description
Sets the frequency that is cut or boosted with the Gain parameter.
Use this to adjust the bandwidth of the mid-range peak filters from
wide to narrow. By increasing the Q on the low and high shelving
filters you can add a dip to their shape.
Description
Serial filters with accurate frequency response.
Parallel filters where the resonance depends on the amount of gain.
Parallel filters where the resonance is raised when boosting the
gain.
171
Effects Reference
EQ Effects