Display Elements; Key To Fig. 2; Functions Of The Operating And Display Elements - Heraeus Kulzer Translux Power Blue Mode D'emploi

Translux Power Blue_GB.book Seite 29 Mittwoch, 12. Mai 2004 4:40 16
Translux Power Blue
4.2

Display elements

4
1
4.2.1

Key to fig. 2

1 Intensity sensor
2 Intensity and battery malfunction display, GREEN, RED
3 Mains connection and battery status control lamps. (Colour GREEN)
4 Button for activating/interrupting polymerisation
4.2.2

Functions of the operating and display elements

1 Intensity sensor
2 RED constant = insufficient intensity
GREEN constant = intensity is suitable for the treatment
RED flashing = battery malfunction
3 GREEN constant = mains connection-control lamp
(lights up when the hand piece being used is not in the charging unit)
GREEN flashing = battery in used hand piece is being loaded
A continuous GREEN light on the hand piece of the charging unit = Rechargeable battery in hand piece is charged
OFF = no operation
4 Button for starting or interrupting the light emission/the polymerisation cycle
TM
Fig. 2 Operating and display elements
2
3
29