Ricoh MPC 2800 AT-C2 Mode D'emploi page 825

• If #5-0 is enabled, this Bit Switch has no effect.
bit 3 [PCL5e/c,PS]: PDL Auto Switching
Disable: The MFPs ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL switching
is disabled, these jobs will not be printed properly.
bit 4 DFU
bit 5 DFU
bit 6 DFU
bit 7 DFU
1001 Bit Switch
003 Bit Switch 3
bit 0 DFU
bit 1 DFU
bit 2 [PCL5e/c]: Legacy HP compatibility
Enable: Uses the same left margin as older HP models such as HP4000/HP8000.
In other words, the left margin defined in the job (usually "<ESC>*r0A") will be changed
to "<ESC>*r1A"
bit 3 DFU
bit 4 DFU
bit 5 DFU
bit 6 DFU
bit 7 DFU
1001 Bit Switch
004 Bit Switch 4 DFU
1001 Bit Switch
Printer Service Mode
0: Enable 1: Disable
- -
- -
- -
- -
0 1
- -
- -
0: Disable 1: Enable
- -
- -
- -
- -
- -
- -
8
457