Ricoh MPC 2800 AT-C2 Mode D'emploi page 599

DFU
006 Y Drum
007 C Drum
008 M Drum
009 K Drum
[ACS Setting (FC to Bk)]
Adjusts the threshold for moving away the image transfer belt from the color PCUs. This SP
moves the image transfer belt away from the color PCUs when the number of B/W image
2907
printouts reaches the number of sheets specified with this SP after consecutive full color image
printouts in the full color mode.
If this SP is set to "0", the image transfer belt does not move away.
001 Continuous Bk Pages
[Gain Adjust] Gain Adjustment of Image Transfer Belt Motor
2908
DFU
001 154 mm/sec
003 115 mm/sec
004 77 mm/sec
[Motor Start Control]
2909
Not used
001 On
[Motor Stop Control]
2910
Not used
001 On
*ENG
[0 to 100 / 0.0 / 0.1 μm/step]
*ENG [0 to 10 / 0 / 1 sheet/step]
*ENG
[0 or 1 / 0 / 1/step]]
*ENG 0: GAIN High (Low level)
1: GAIN Low (High level)
*ENG
[0 to 1 / 0 / 1 sheet/step]
ENG
0: normal, 1: synchro
[0 to 1 / 0 / 1 sheet/step]
ENG
0: normal, 1: synchro
System Service Mode
8
231