Ricoh MPC 2800 AT-C2 Mode D'emploi page 571

[Thin: Paper Size Correction]
Adjusts the size correction coefficient for the paper transfer roller current for each paper size.
2461
SP2453 and SP2457 are multiplied by these SP values.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side: S1
005 Paper Transfer: Plain: 1st Side: S2
009 Paper Transfer: Plain: 1st Side: S3
013 Paper Transfer: Plain: 1st Side: S4
017 Paper Transfer: Plain: 1st Side: S5
[Thin: Leading Edge Correction] Thin Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2453 and SP2457 are multiplied by these SP values.
2471
Plain: 154 mm/sec, 1200: 77 mm/sec
• The paper leading edge area can be adjusted with SP2472.
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2451 is multiplied by these SP values.
2471
• The paper leading edge area can be adjusted with SP2472.
[100 to 600 / 100 / 5%/step]
*ENG
S1 size ≥ 297 mm (Paper width)
[100 to 600 / 120 / 5%/step]
*ENG
297 mm ≥ S2 size ≥ 275 mm (Paper
width)
[100 to 600 / 140 / 5%/step]
*ENG
297 mm ≥ S2 size ≥ 275 mm (Paper
width)
[100 to 600 / 160 / 5%/step]
*ENG
297 mm ≥ S2 size ≥ 275 mm (Pape r
width)
*ENG [100 to 600 / 180 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
System Service Mode
8
203