Ricoh MPC 2800 AT-C2 Mode D'emploi page 830

8. Appendix: SP Mode Tables
Scanner SP Mode
SP1-xxx (System and Others)
[Compression Type]
1004
Selects the compression type for binary picture processing.
1004 1 Compression Type
[Erase margin]
Creates an erase margin for all edges of the scanned image.
1005
If the machine has scanned the edge of the original, create a margin. This SP is activated
only when the machine uses TWAIN scanning.
1005 1 Range from 0 to 5 mm
1009 [Remote scan disable]
8
1009 1 Enable or disable remote scan.
1010 [Non Display Clear Light PDF] *CTL
1010 1 Enable or disable remote scan.
SP2-XXX (Scanning-image quality)
[Compression Level (Gray-scale)]
2021
Selects the compression ratio for grayscale processing mode (JPEG) for the three settings that
can be selected at the operation panel.
2021 1 Level 3 (Middle Image Quality)
2021 2 Level 2 (High Image Quality)
462
[1 to 3 / 1 / 1/step ]
*CTL
1: MH, 2: MR, 3: MMR
*CTL [0 to 5 / 0 / 1 mm/step ]
[0 or 1 / 0 / - ]
*CTL
0: enable, 1: disable
[0 or 1 / 0 / - ]
0: Display, 1: No display
[5 to 95 / 40 / 1 /step ]
*CTL
[5 to 95 / 50 / 1 /step ]