Ricoh MPC 2800 AT-C2 Mode D'emploi page 765

8 057 O:TX Jobs/DesApl
• If the send is started from Desk Top Binder or Web Image Monitor, for example, then the O: counter
increments.
T:FIN Jobs
8 061
These SPs total the finishing methods. The finishing method is specified by the
application.
C:FIN Jobs
8 062
These SPs total finishing methods for copy jobs only. The finishing method is specified
by the application.
F:FIN Jobs
These SPs total finishing methods for fax jobs only. The finishing method is specified by
8 063
the application.
Note: Finishing features for fax jobs are not available at this time.
P:FIN Jobs
8 064
These SPs total finishing methods for print jobs only. The finishing method is specified
by the application.
S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing method is specified
8 065
by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs
These SPs total finishing methods for jobs output from within the document server mode
8 066
screen at the operation panel. The finishing method is specified from the print window
within document server mode.
O:FIN Jobs
8 067
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
8 06x 1 Sort
*CTL
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
Number of jobs started in Sort mode. When a stored copy job is set for
Sort and then stored on the document server, the L: counter increments.
(See SP8 066 1)
System Service Mode
8
397