Ricoh MPC 2800 AT-C2 Mode D'emploi page 688

8. Appendix: SP Mode Tables
12
13
14
15
16
17
18
CERT: Error
Displays a number code that describes the reason for the request for update of the
8
certification.
0
1
068
2
3
4
5
6
069 CERT: Up ID
083 Firmware Up Status
085 Firm Up User Check
320
The rescue certification setting is completed and the GW URL is being notified of the
certification update request.
The notification of the request for certification update has completed successfully,
and the system is waiting for the certification update request from the rescue GW
URL.
The notification of the certification request has been received from the rescue GW
controller, and the certification is being stored.
The certification has been stored, and the GW URL is being notified of the successful
completion of this event.
The storing of the certification has failed, and the GW URL is being notified of the
failure of this event.
The certification update request has been received from the GW URL, the GW URL
was notified of the results of the update after it was completed, but an certification
error has been received, and the rescue certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL is being
notified of the failure of the certification update.
Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification has expired.
An SSL error notification has been issued. Issued after the certification has expired.
Notification of shift from a common authentication to an individual certification.
Notification of a common certification without ID2.
Notification that no certification was issued.
Notification that GW URL does not exist.
The ID of the request for certification.
Displays the status of the firmware update.
This SP setting determines if the operator can confirm the
previous version of the firmware before the firmware update
execution. If the option to confirm the previous version is