Sc9Xx: Miscellaneous - Ricoh MPC 2800 AT-C2 Mode D'emploi

No. Type
• SD card (D377) not installed
1. Replace the NVRAM and then install the new SD card (D377).
2. Check and reinstall the SD card (D377).
No. Type
TPM system authentication error
The system firmware is not authenticated by TPM (security chip).
CTL
878
• Incorrect updating for the system firmware
D
• Defective flash ROM on the controller board
Replace the controller board.
No. Type
File format converter error
The file format converter does not respond.
CTL
880
D
• Defective file format converter
Replace the file format converter.

SC9xx: Miscellaneous

No. Type
Electric counter error
Abnormal data in the counters.
• Defective NVRAM
CTL
900
• Defective controller
D
1. Check the connection between the NVRAM and controller.
2. Replace the NVRAM.
3. Replace the controller.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC Tables
3
101