Ricoh MPC 2800 AT-C2 Mode D'emploi page 689

086 Firmware Size
087 CERT: Macro Version
088 CERT: PAC Version
089 CERT: ID2 Code
090 CERT: Subject
091 CERT: Serial Number
092 CERT: Issuer
093 CERT: Valid Start
094 CERT: Valid End
Selection Country
Select the country where embedded RCG-M is installed in the machine. After selecting the
country, you must also set the following SP codes for embedded RCG-M:
• SP5816-153
150
• SP5816-154
• SP5816-161
0: Japan, 1: USA, 2: Canada, 3: UK, 4: Germany, 5: France, 6: Italy,
7: Netherlands, 8: Belgium, 9: Luxembourg, 10: Spain
Line Type Authentication Judgment
151
Press [Execute].
selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the
URL.
Allows the service technician to confirm the size of the
firmware data files during the firmware update execution.
Displays the macro version of the @Remote certification.
Displays the PAC version of the @Remote certification.
Displays ID2 for the @Remote certification. Spaces are
displayed as underscores (_). Asteriskes (****) indicate
that no @Remote certification exists.
Displays the common name of the NRS certification subject.
CN = the following 17 bytes. Spaces are displayed as
underscores (_). Asterisks (****) indicate that no DESS
exists.
Displays serial number for the @Remote certification.
Asterisks (****) indicate that no DESS exists.
Displays the common name of the issuer of the @Remote
certification. CN = the following 30 bytes. Asteriskes (****)
indicate that no DESS exists.
Displays the start time of the period for which the current
@Remote certification is enabled.
Displays the end time of the period for which the current
@Remote certification is enabled.
System Service Mode
8
321