Ricoh MPC 2800 AT-C2 Mode D'emploi page 695

209 @Remote Setting Clear
250 CommLog Print
5821 [Remote Service Address]
002 RCG IP Address
[NV-RAM Data Upload]
Uploads the UP and SP mode data (except for counters and the serial number) from the
5824
NVRAM to an SD card. For details, see the "NVRAM Data Upload/Download" in the
"System Maintenance Reference" of the Field Service Manual.
001 NV-RAM Data Upload
[NV-RAM Data Download]
Downloads the UP and SP mode data from an SD card to the NVRAM. For details, see the
5825
"NVRAM Data Upload/Download" in the "System Maintenance Reference" of the Field
Service Manual.
001 NV-RAM Download
5828 [Network Setting]
050 1284 Compatibility (Centro)
052 ECP (Centro)
-2396 Device ID for Basil is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its embedded RCG setup.
Prints the communication log.
Sets the IP address of the RCG (Remote
*CTL Communication Gate) destination for call
processing at the remote service center.
# -
# -
*CTL -
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
System Service Mode
8
327