Ricoh MPC 2800 AT-C2 Mode D'emploi page 703

045 WPA Debug Lvl
5841 [Supply Name Setting]
001 Toner Name Setting: Black
002 Toner Name Setting: Cyan
003 Toner Name Setting: Yellow
Toner Name Setting:
004
Magenta
007 OrgStamp
011 Staple Std1
012 Staple Std2
013 Staple Std3
014 Staple Std4
5842 [GWWS Analysis Mode] DFU
001 Setting 1
002 Setting 2
5844 [USB]
001 Transfer Rate
Selects the debug level for WPA authentication
application.
*CTL [1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the IEEE802.11
card is installed.
Specifies supply names. These appear on the
*CTL screen when the user presses the Inquiry button in
the user tools screen.
Default: 00000000 – do not change
*CTL Netfiles: Jobs to be printed from the document
server using a PC and the DeskTopBinder software
Adjusts the debug program modesetting.
Bit7: 5682 mmseg-log setting
*CTL 0: Date/Hour/Minute/Second
1: Minute/Second/Msec.
0 to 6: Not used
0x01: Full speed
*CTL
0x04: Auto Change
System Service Mode
8
335