Ricoh MPC 2800 AT-C2 Mode D'emploi page 463

No. Type
[30]
[30]
No. Type
HDD Encryption unit error 2
A serious error occurs when the HDD data is encrypted to update an encryption key
with the HDD encryption unit.
[8]
CTL
859
C
[9]
[10]
Details (Symptom, Possible Cause, Troubleshooting Procedures)
An error occurs while the NVRAM data is encrypted.
• Defective NVRAM on the controller board
1. Replace the NVRAM.
NVRAM data encryption error 2:
An error occurs before the NVRAM data is encrypted.
• Defective controller board
1. Replace the controller board.
Other error:
A serious error occurs while the data is encrypted.
• Same as SC991
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD check error:
The HDD is not correctly installed.
• No HDD installed
• Unformatted HDD
• The encryption key on the controller is different from the one on the
HDD
1. Install the HDD correctly.
1. Initialize the HDD.
Power failure during the data encryption:
The data encryption (NVRAM and HDD) has not been completed.
• Power failure during the data encryption
1. Initialize the HDD.
Data read/write error:
The DMAC error is detected twice or more.
SC Tables
3
95