Ricoh MPC 2800 AT-C2 Mode D'emploi page 654

8. Appendix: SP Mode Tables
Last Correct Value: GO
002
Color
[Black Level Fine Adj. Display]
4656
BE: Blue Even signal, BO: Blue Odd signal
Last Correct Value: BE
001
Color
Last Correct Value: BO
002
Color
[Gain Adjustment]
4658
Displays the previous gain value of the amplifiers on the controller for Red.
8
001 Last Correct Value: R Color
[Gain Adjustment]
4659
Displays the previous gain value of the amplifiers on the controller for Green.
001 Last Correct Value: G Color
[Gain Adjustment]
4660
Displays the previous gain value of the amplifiers on the controller for Blue.
001 Last Correct Value: B Color
[Gain Adjustment]
4661
RE: Red Even signal, RO: Red Odd signal
001 Last Correct Value: RE Color
286
[0 to 16383 / 0 / 1 digit/step]
Displays the black offset value (rough adjustment)
for the odd green signal in the CCD circuit board
*ENG
(color printing speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the black offset value (rough adjustment)
for the even blue signal in the CCD circuit board
*ENG
(color printing speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the black offset value (rough adjustment)
for the odd blue signal in the CCD circuit board
*ENG
(color printing speed).
[0 to 16383 / 0 / 1 digit/step]
*ENG [0 to 7 / 0 / 1 digit/step]
*ENG [0 to 7 / 0 / 1 digit/step]
*ENG [0 to 7 / 0 / 1 digit/step]
*ENG
[0 to 1023 / 0 / 1 digit/step]