Ricoh MPC 2800 AT-C2 Mode D'emploi page 577

005 Separation DC: Thick 1: 1st Side
006 Separation DC: Thick 1: 2nd Side
[Thick 1: Trailing Edge Correction] Thick 1 Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode. SP2502 and SP2507 are multiplied by these SP values.
2523
Thick 1 and Thick 2&Fine: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2524.
001 Paper Transfer: Thick 1: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
005 Paper Transfer: Thick 1: 1st Side
006 Paper Transfer: Thick 1: 2nd Side
[Thick 1: Switch Timing: Trail. Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2524
paper trailing edge between the erase margin area and the image area.
Thick 1 and Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Thick 1: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
005 Paper Transfer: Thick 1: 1st Side
006 Paper Transfer: Thick 1: 2nd Side
2530 [Thick 1: Environment Correction]
001 Paper Transfer: Thick 1: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
003 Paper Transfer: BW: 1st Side
004 Paper Transfer: BW: 2nd Side
005 Paper Transfer: FC: 1st Side
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[1 to 60 / 22 / 1 /step]
*ENG
*ENG
[1 to 60 / 11 / 1 /step]
*ENG
*ENG [1 to 60 / 1 / 1 /step]
System Service Mode
8
209