Ricoh MPC 2800 AT-C2 Mode D'emploi page 674

8. Appendix: SP Mode Tables
003 Cancellation On/Off
004 Cancellation Time
005 Counter Clear Time
5414 [Access Mitigation]
001 Mitigation On/Off
8
002 Mitigation Time
5415 [Password Attack]
001 Permissible Number
002 Detect Time
5416 [Access Information]
306
[1 to 10 / 5 / 1/step]
Determines whether the system waits the prescribed
time for input of a correct user ID and password
after an account lockout has occurred.
[0 or 1 / 0 / -]
*CTL
0: Off (no wait time, lockout not cancelled)
1: On (system waits, cancels lockout if correct user
ID and password are entered.
Determines the length of time that the system waits
for correct input of the user ID and password after
a lockout has occurred. This setting is used only if
*CTL
SP5413-3 is set to "1" (on).
[1 to 999 / 60 / 1 min./step]
*CTL Not Used
Switches on/off masking of continuously used IDs
and passwords that are identical.
*CTL
[0 or 1 / 0 / -]
0: Off, 1: On
Sets the length of time for excluding continuous
access for identical user IDs and passwords.
*CTL
[0 to 60 / 15 / 1 min./step]
Sets the number of attempts to attack the system with
random passwords to gain illegal access to the
*CTL
system.
[0 to 100 / 30 / 1 attempt/step]
Sets the time limit to stop a password attack once
such an attack has been detected.
*CTL
[1 to 10 / 5 / 1 sec./step]