Ricoh MPC 2800 AT-C2 Mode D'emploi page 610

8. Appendix: SP Mode Tables
Displays the remaining amount of each color toner. These are calculated by the operating
009-012
times of the toner supply pumps.
009 K Toner Remaining
010 M Toner Remaining
011 C Toner Remaining
012 Y Toner Remaining
Adjusts the threshold of toner near end for each color. The toner near end message appears
on the LCD when the remaining toner amount reaches this threshold. When one of these
013-016
SPs (SP3-101-009 to 012 or -032 to -035) reaches this threshold, toner near end is
detected.
013 Near End Threshold: Bk
014 Near End Threshold: M
015 Near End Threshold: C
016 Near End Threshold: Y
017-020 DFU
017 Cartridge Error Threshold: Bk
8
018 Cartridge Error Threshold: M
019 Cartridge Error Threshold: C
020 Cartridge Error Threshold: Y
Delta Vt Threshold
021
This SP is the threshold for toner end. Delta Vt: Vt-Vtref
When both this SP and SP3-101-026 occur at same time, toner end is determined.
Displays the total delta Vt (Vt-Vtref) value for each color.These are calculated by pixel
022-025
counting.
022 Delta Vt Sum: Bk
023 Delta Vt Sum: M
024 Delta Vt Sum: C
025 Delta Vt Sum: Y
242
*ENG
*ENG
[–50000 to 600 / 0 / 0.001 g/step]
*ENG
*ENG
*ENG [0 to 600 / 30 / 1 g/step]
*ENG
*ENG [0 to 600 / 25 / 1 g/step]
*ENG
*ENG
*ENG
[–50000 to 0 / –50000 / 1 g/step]
*ENG
*ENG
*ENG [0 to 5 / 0.5 / 0.01 V/step]
*ENG
*ENG
[0 to 655 / 0 / 0.01 V/step]
*ENG
*ENG