Ricoh MPC 2800 AT-C2 Mode D'emploi page 625

K2: Upper/Lower Limit
010
Coefficient 1
011 K2: Upper Limit Correction
012 K2: Lower Limit Correction
013 Diffusion Correction: M
014 Diffusion Correction: C
015 Diffusion Correction: Y
016 K2: Check: M
017 K2: Check: C
018 K2: Check: Y
3363 [ID Pattern Timing Setting] DFU
001 Scan YCMBk
Paper Transfer Release Start
002
Time
003 Delay Time
004 MUSIC Delay Time
3371 [M/A Calculation] DFU
001 Correction Coefficient: Bk
002 Correction Coefficient: M
003 Correction Coefficient: C
0:Linear, 1: Curve
*ENG [0 to 1 / 0 / 0.01 /step]
*ENG [–0.2 to 0.4 / 0.07 / 0.01 /step]
*ENG [–0.2 to 0.4 / –0.07 / 0.01 /step]
*ENG
*ENG [0.75 to 1.35 / 1 / 0.01 /step]
*ENG
*ENG
*ENG [0 to 1 / 0.25 / 0.001 /step]
*ENG
Adjusts the detection timing for the process
control pattern.
*ENG
[-500 to 500 / 13.7 / 1 mm/step]
Adjusts the timing when the paper transfer unit is
kept away from the image transfer belt.
*ENG
[0 to 2500 / 0 / 1 msec/step]
Adjusts the processing timing for the process
control pattern.
*ENG
[0 to 2500 / 880 / 1 msec/step]
Adjusts the processing timing for the pattern that
is used for the line position adjustment.
*ENG
[-2500 to 2500 / 300 / 1 msec/step]
*ENG [0.5 to 2.0 / 1 / 0.01 /step]
*ENG [0.5 to 2.0 / 0.95 / 0.01 /step]
*ENG [0.5 to 2.0 / 1 / 0.01 /step]
System Service Mode
8
257