Ricoh MPC 2800 AT-C2 Mode D'emploi page 555

Enables or disables the main scan length detection for the laser.
Paper Interval
002
Adjusts the interval of the main scan length detection for the laser.
2190 [Line Position Adj.]
001 Paper Int. Mag.: Subdot: Bk
002 Paper Int. Mag.: Subdot: M
003 Paper Int. Mag.: Subdot: C
004 Paper Int. Mag.: Subdot: Y
005 M. Scan Mag.: Subdot: M
006 M. Scan Mag.: Subdot: C
007 M. Scan Mag.: Subdot: Y
008 Area Mag.: Subdot: M
009 Area Mag.: Subdot: C
010 Area Mag.: Subdot: Y
011 S. Scan Cor. Setting
[MUSIC Coefficient Setting] Line Position Adjustment: Coefficient Setting DFU
2191
ch 0: ID sensor at rear, ch 1: ID sensor at center, ch 2: ID sensor at front
001 ch 0: Filter: Front: a1
002 ch 0: Filter: Front: a2
003 ch 0: Filter: Front: b0
004 ch 0: Filter: Front: b1
*ENG [0 to 999 / 1 / 1 sec/step]
*ENG
*ENG
DFU
[0 or 1 / 1 / 1/step]
*ENG
*ENG
*ENG DFU
[0 or 1 / 1 / 1/step]
*ENG
0: Disable correction
*ENG
1: Enable correction
*ENG
DFU
*ENG
[0 or 1 / 1 / 1/step]
*ENG
DFU
[0 or 1 / 0 / 1/step]
*ENG
0: Adjusted with Bk
1: Adjusted in minimum shift among four
colors
*ENG [–131071 to 131071 / 125869 / 1 bit/step]
*ENG [–131071 to 131071 / –60488 / 1 bit/step]
*ENG [–131071 to 131071 / 39 / 1 bit/step]
*ENG [–131071 to 131071 / 77 / 1 bit/step]
System Service Mode
8
187