Ricoh MPC 2800 AT-C2 Mode D'emploi page 546

8. Appendix: SP Mode Tables
Adjusts the area correction value for each LD power.
The main scan is divided into 16 areas. However, the image areas are limited from area 1
to area 14.
For BK and Magenta, area 1 is at the rear side of the machine (left side of the image) and
area 14 is at the front side of the machine (right side of the image).
For Cyan and Yellow, area 1 is at the front side of the machine (right side of the image) and
area 14 is at the rear side of the machine (left side of the image).
001 Area 0: Bk
002 Area 1: Bk
003 Area 2: Bk
004 Area 3: Bk
005 Area 4: Bk
006 Area 5: Bk
007 Area 6: Bk
008 Area 7: Bk
009 Area 8: Bk
8
010 Area 9: Bk
011 Area 10: Bk
012 Area 11: Bk
013 Area 12: Bk
014 Area 13: Bk
015 Area 14: Bk
016 Area 15: Bk
033 Area 0: M
034 Area 1: M
035 Area 2: M
036 Area 3: M
178
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
This is for the synchronizing detection board.
*ENG
[50 to 150 / 100 / 1 %/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
This is out of the image area.
*ENG
[50 to 150 / 100 / 1 %/step]
*ENG This is for the synchronizing detection board.
*ENG
*ENG
[50 to 150 / 100 / 1 %/step]
*ENG