Ricoh MPC 2800 AT-C2 Mode D'emploi page 696

8. Appendix: SP Mode Tables
065 Job Spooling
066 Job Spooling Clear: Start Time
069 Job Spooling (Protocol)
8
090 TELNET (0: OFF 1: ON)
091 Web (0: OFF 1: ON)
145 Active IPv6 Link Local Address
328
• This SP is activated only when SP5-828-50 is set
to "1".
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
Treatment of the job when a spooled job exists at power
on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
Validates or invalidates the job spooling function for
each protocol.
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: (Reserved)
Enables or disables the Telnet protocol.
[0 or 1 / 1 / – ]
0: Disable, 1: Enable
Enables or disables the Web operation.
[0 or 1 / 1 / – ]
0: Disable, 1: Enable
This is the IPv6 local address link referenced on the
Ethernet or wireless LAN (802.11b) in the format:
"Link Local Address" + "Prefix Length"