Ricoh MPC 2800 AT-C2 Mode D'emploi page 563

004 Threshold 4
2311 [Non Image Area: Bias]
001 Image Transfer
002 Paper Transfer
2326 [Transfer Roller CL: Bias] Transfer Roller Cleaning: Bias Adjustment
Positive
001
Adjusts the positive voltage of the paper transfer roller for cleaning the paper transfer roller.
Negative
002
Adjusts the negative current of the paper transfer roller for cleaning the paper transfer roller.
Positive
003
Adjusts the negative current limit of the paper transfer roller for cleaning the paper transfer
roller.
004 Negative
[Common: BW: Bias] Image Transfer Belt: B/W: Bias Adjustment
2351
Plain: 154 mm/sec, Thick 1 and Thick 2&Fine: 77 mm/sec
Image Transfer: Plain
001
Adjusts the current for the image transfer belt in B/W mode for plain paper.
002 Image Transfer: Thick 1
[0 to 350 / 148 / 1 mm/step]
Threshold 4 ≤ paper ≤ Threshold 3:
*ENG Paper is detected as "S4" size.
Paper ≤ Threshold 4:
Paper is detected as "S5" size.
Adjusts the bias of the image transfer belt between
images. This value is added to the value of the
*ENG
image transfer belt bias.
[10 to 250 / 100 / 5 %/step]
Adjusts the bias of the paper transfer roller between
images.
*ENG
[0 to 130 / 5 / 1 –μA/step]
*ENG [0 to 2100 / 500 / 100 V /step]
*ENG [10 to 400 / 300 / 10 %/step]
*ENG [0 to 2100 / 2000 / 100 V/step]
*ENG [10 to 400 / 100 / 10 %/step]
[0 to 60 / 25 / 1 μA]
*ENG
[0 to 60 / 12 / 1 μA]
*ENG
System Service Mode
8
195