Ricoh MPC 2800 AT-C2 Mode D'emploi page 653

[Gain Adjustment] Gain Adjustment: Digital
4633
Displays the gain value of the amplifiers on the controller for BE or BO.
001 Latest: BE Color
002 Latest: BO Color
4645 [Scan Adj. Time Out Error]
001 White Offset Correction
002 Black Offset Correction
[Read Hard Error]
4647
Displays the result of the SBU connection check.
001 Power-ON
[Black Level Fine Adj. Display]
4654
RE: Red Even signal, RO: Red Odd signal
Last Correct Value: RE
001
Color
Last Correct Value: RO
002
Color
[Black Level Fine Adj. Display]
4655
GE: Green Even signal, GO: Green Odd signal
Last Correct Value: GE
001
Color
-
[0 to 1023 / 0 / 1 digit/step]
-
-
[0 to 65535 / 0 / 1 digit/step]
-
[0 to 35535 / 0 / 1digit /step]
- 0: OK, Other: SBU connection check failure
If the SBU connection check fails, SC144 occurs.
Displays the black offset value (rough adjustment)
for the even red signal in the CCD circuit board
*ENG
(color printing speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the black offset value (rough adjustment)
for the odd red signal in the CCD circuit board
*ENG
(color printing speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the black offset value (rough adjustment)
*ENG for the even green signal in the CCD circuit board
(color printing speed).
System Service Mode
8
285