Ricoh MPC 2800 AT-C2 Mode D'emploi page 433

No. Type
Second duct fan error
The machine does not detect the fan motor lock signal for 10 seconds while the
second duct fan turns on.
• Disconnected harness
• Overload on the second duct fan motor
534 D
• Defective second duct motor
• Defective IOB
1. Check or replace the harness.
2. Replace the second duct fan.
3. Replace the IOB.
No. Type
Paper exit fan error
The machine does not detect the fan motor lock signal for 10 seconds while the
paper exit fan turns on.
• Disconnected harness
• Overload on the paper exit fan motor
535 D
• Defective paper exit motor
• Defective IOB
1. Check or replace the harness.
2. Replace the paper exit fan.
3. Replace the IOB.
No. Type
Third duct fan error
The motor lock signal error is detected for 10 seconds after the motor lock signal
was first detected.
536 D
• Defective third duct fan motor
• Disconnected or defective harness
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC Tables
3
65