Ricoh MPC 2800 AT-C2 Mode D'emploi page 705

Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Delivery Svr Capability (Ext)
Changes the capability of the registered that the I/O device registered.
011
Bit7 = 1 Address book usage limitation (Limitation for each authorized user)
Bit6 = 1 RDH authorization link
Bit5 to 0: Not used
Server Scheme (Primary) DFU
013
This is used for the scan router program.
Server Port Number (Primary) DFU
014
This is used for the scan router program.
Server URL Path (Primary) DFU
015
This is used for the scan router program.
Server Scheme (Secondary) DFU
016
This is used for the scan router program.
Server Port Number (Secondary) DFU
017
This is used for the scan router program.
Server URL Path (Secondary) DFU
018
This is used for the scan router program.
022 Rapid Sending Control
[0 to 255 / 0 / 1 /step]
System Service Mode
8
337