Ricoh MPC 2800 AT-C2 Mode D'emploi page 608

8. Appendix: SP Mode Tables
Consumption pattern: Y
012
Specifies the belt mark generating time for checking the yellow toner density when toner
density is detected to be low at the toner density adjustment.
T1 Bias: Bk
013
Adjusts the image transfer belt bias for Black.
T1 Bias: M
014
Adjusts the image transfer belt bias for Magenta.
T1 Bias: C
015
Adjusts the image transfer belt bias for Cyan.
T1 Bias: Y
016
Adjusts the image transfer belt bias for Yellow.
Developer Mixing Time
017
Specifies the developer mixing time at the toner density adjustment.
Consumption Pattern: LD: DUTY: Bk
8 Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
018
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-001) exceed the target values (SP3611-005) by more than the specified
thresholds (SP3239-009).
Consumption Pattern: LD: DUTY: M
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
019
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-002) exceed the target values (SP3611-006) by more than the specified
thresholds (SP3239-009).
Consumption Pattern: LD: DUTY: C
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
020
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-003) exceed the target values (SP3611-007) by more than the specified
thresholds (SP3239-009).
021 Consumption Pattern: LD: DUTY: Y
240
*ENG [0 to 255 / 5 / 1 time/step]
*ENG [0 to 80 / 20 / 1 µA/step]
*ENG [0 to 80 / 20 / 1 µA/step]
*ENG [0 to 80 / 22 / 1 µA/step]
*ENG [0 to 80 / 30 / 1 µA/step]
*ENG [0 to 250 / 10 / 1 sec/step]
*ENG [0 to 15 / 15 / 1 /step]
*ENG [0 to 15 / 15 / 1 /step]
*ENG [0 to 15 / 15 / 1 /step]
*ENG [0 to 15 / 15 / 1 /step]