Ricoh MPC 2800 AT-C2 Mode D'emploi page 495

Jam Code SP Display
Finisher Stapler Exit: EUP
7504 194
(B804/B805)
Finisher Exit: EUP (B804/
7504 195
B805)
7504 196 -
7504 197 -
Finisher Folder: EUP
7504 198
(B804 only)
Finisher Tray Motor: EUP
7504 199
(B804/B805)
Finisher Jogger Motor:
7504 200
EUP (B804/B805)
Finisher Shift Motor: EUP
7504 201
(B804/B805)
Description
Stapling tray paper sensor does not turn on
after the finisher entrance sensor has turned on.
Stapling tray paper sensor does not turn off
after it has turned on.
Upper tray exit sensor does not turn on while
the stack feed-out belt is turned on.
Upper tray exit sensor does not turn off after the
stack feed-out belt has returned to its home
position.
-
-
Fold bottom fence HP sensor does not turn on
after the fold roller motor has stopped.
Fold unit exit sensor does not turn on after the
fold rollers have stopped.
Fold unit exit sensor does not turn off after the
fold rollers have stopped.
Upper tray limit sensor does not turn on after the
upper tray has lifted up.
Upper tray limit sensor does not turn off after the
upper tray has moved down.
Jogger fence HP sensor does not turn on/off
after the jogger motor has turned on.
Stack feed out belt HP sensor does not turn on/
off after the feed out belt motor has turned on.
Shift roller HP sensor does not turn on/off after
the shift roller motor has turned on.
Exit guide plate HP sensor does not turn on/off
after the exit guide plate motor has turned on.
Stacking roller HP sensor does not turn on/off
after the stacking sponge roller motor has
turned on.
Jam Detection
LCD
Display
R5-R7
R8-R12
-
-
6
R8-R12
R1-R4
R8-R12
R1-R4
127