Ricoh MPC 2800 AT-C2 Mode D'emploi page 655

002 Last Correct Value: RO Color
[Gain Adjustment]
4662
GE: Green Even signal, GO: Green Odd signal
001 Last Correct Value: GE Color
002 Last Correct Value: GO Color
[Gain Adjustment]
4663
BE: Blue Even signal, BO: Blue Odd signal
001 Last Correct Value: BE Color
002 Last Correct Value: BO Color
[Black Level Fine Adj. Display]
4673
RE: Red Even signal, RO: Red Odd signal
001 Factory Setting: RE Color
002 Factory Setting: RO Color
[Black Level Fine Adj. Display]
4674
GE: Green Even signal, GO: Green Odd signal
001 Factory Setting: GE Color
002 Factory Setting: GO Color *ENG
*ENG
*ENG
[0 to 1023 / 0 / 1 digit/step]
*ENG
*ENG
[0 to 1023 / 0 / 1 digit/step]
*ENG
Displays the factory setting values of the black level
adjustment for the even red signal in the CCD circuit
*ENG
board (color printing speed)..
[0 to 16383 / 0 / 1 digit/step]
Displays the factory setting values of the black level
adjustment (rough adjustment) for the odd red
signal in the CCD circuit board (color printing
*ENG
speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the factory setting values of the black level
adjustment (rough adjustment) for the even green
signal in the CCD circuit board (color printing
*ENG
speed).
[0 to 16383 / 0 / 1 digit/step]
Displays the factory setting values of the black level
adjustment (rough adjustment) for the odd green
System Service Mode
8
287