Ricoh MPC 2800 AT-C2 Mode D'emploi page 718

8. Appendix: SP Mode Tables
5888 [Personal Information Protect]
001 -
[SDK Application Counter]
5893
Displays the counter name of each SDK application.
001 SDK-1
002 SDK-2
003 SDK-3
004 SDK-4
005 SDK-5
8
006 SDK-5
[External Charge Unit Setting]
5894
-
001 Switch Charge Mode
[Application Invalidation]
5895
Enables or disables the printer or scanner application.
These SPs are used only when an external controller is installed in the machine.
001 Printer
002 Scanner
350
Touch [Execute] in the message when you are
prompted.
Selects the protection level for logs.
[0 to 1 / 0 / 1}
*CTL
0: No authentication, No protection for logs
1: No authentication, Protected logs (only an
administrator can see the logs)
*CTL -
*ENG [0 to 2 / 0 / 1/step]
*CTL [0 or 1 / 0 / -]
0: Enable
*CTL
1: Disable