Ricoh MPC 2800 AT-C2 Mode D'emploi page 701

Reso: Copy (Mono)
122
Selects the resolution for BW copy mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi
Reso: Print (Color)
123
Selects the resolution for color print mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 300dpi/ 2: 150dpi/ 3: 75dpi
Reso: Print (Color)
124
Selects the resolution for BW print mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi
5840 [IEEE 802.11]
Channel Max
Sets the maximum number of channels available for data transmission via the wireless LAN.
006
The number of channels available varies according to location. The default settings are set
for the maximum end of the range for each area. Adjust the upper 4 bits to set the maximum
number of channels. DFU
• Do not change the setting.
Channel Min
Sets the minimum number of channels available for data transmission via the wireless LAN.
007
The number of channels available varies according to location. The default settings are set
for the minimum end of the range for each area. Adjust the lower 4 bits to set the minimum
number of channels. DFU
• Do not change the setting.
[0 to 5 / 3 / 1/step]
This is basically adjusted by the remote system.
[0 to 3 / 2 / 1/step]
This is basically adjusted by the remote system.
[0 to 5 / 3 / 1/step]
[1 to 11 or 13 / 11 or 13 / 1 /step]
*CTL Europe/Asia: 1 to 13
NA/ Asia: 1 to 11
[1 to 11 or 13 / 1 / 1 /step]
*CTL Europe: 1 to 13
NA/ Asia: 1 to 11
System Service Mode
8
333