Ricoh MPC 2800 AT-C2 Mode D'emploi page 559

Page: Power ON:BW+FC
Adjusts the threshold for the condition of the line position adjustment for BW and color printing
mode. The condition of the line position adjustment is determined for large condition
013
difference and small condition difference when the number of outputs in color printing mode
reaches the value specified with this SP and the condition of SP3-510-009 or SP3-510-010
is satisfied. However, it is basically not necessary to adjust this SP.
[MUSIC Execution Result]
2194
Line Position Adjustment: Execution Result
001 Year
002 Month
003 Day
004 Hour
005 Minute
006 Temperature
007 Execution Result
008 Number of Execution
009 Number of Failure
010 Error Result: M
011 Error Result: C
012 Error Result: Y
[MUSIC Start Time]
2197
DFU
*ENG [0 to 999 / 200 / 1 page/step]
*ENG [0 to 99 / 0 / 1 year/step]
*ENG [1 to 12 / 1 / 1 month/step]
*ENG [1 to 31 / 1 / 1 day/step]
*ENG [0 to 23 / 0 / 1 hour/step]
*ENG [0 to 59 / 0 / 1 minute/step]
*ENG [0 to 100 / 0 / 1 deg/step]
[0 or 1 / 0 / 1 /step]
*ENG
0: Completed successfully, 1: Failed
*ENG [0 to 999999 / 0 / 1 times/step]
*ENG [0 to 999999 / 0 / 1 times/step]
*ENG [0 to 9 / 0 / 1 /step]
0: Not done
*ENG
1: Completed successfully
2: Cannot detect patterns
3: Fewer lines on the pattern than the target
*ENG
4: Not used
5: Out of the adjustment range
6 to 9: Not used
System Service Mode
8
191