Ricoh MPC 2800 AT-C2 Mode D'emploi page 535

012 Main Mag.: Low Speed: Y
013 Offset: Mag Bk1-2
014 Offset: Mag M1-2
015 Offset: Mag C1-2
016 Offset: Mag Y1-2
2103 [Erase Margin Adjustment] (Area, Paper Size)
Adjusts the erase margin by deleting image data at the margins.
001 Lead Edge Width
002 Trail. Edge Width
003 Left
004 Right
005 Lead Edge Width: Thin
006 Duplex Trail. L Size
007 Duplex Trail. M Size
008 Duplex Trail. S Size
009 Duplex Left Edge
010 Duplex Right Edge
011 Duplex Trail. L Size:Thick
012 Duplex Trail. M Size:Thick
013 Duplex Trail. S Size:Thick
014 Duplex Left Edge:Thick
015 Duplex Right Edge:Thick
2105 [LD Power Adj.] (Process Speed, Color)
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
*ENG
*ENG
*ENG
[-256 to 255 / 0 / 1 sub-dot/step]
*ENG
*ENG
*ENG
[0 to 9.9 / 4.2 / 0.1 mm/step]
*ENG
*ENG
[0 to 9.9 / 2 / 0.1 mm/step]
*ENG
*ENG [0 to 9.9 / 5 / 0.1 mm/step]
*ENG [0 to 4 / 0 / 0.1 mm/step]
*ENG [0 to 4 / 0 / 0.1 mm/step]
*ENG [0 to 4 / 0 / 0.1 mm/step]
*ENG
[0 to 1.5 / 0.3 / 0.1 mm/step]
*ENG
*ENG [0 to 4 / 1 / 0.1 mm/step]
*ENG [0 to 4 / 0.8 / 0.1 mm/step]
*ENG [0 to 4 / 0.6 / 0.1 mm/step]
*ENG
[0 to 1.5 / 0.3 / 0.1 mm/step]
*ENG
System Service Mode
8
167