Ricoh MPC 2800 AT-C2 Mode D'emploi page 657

002 Factory Setting: RO Color
[Gain Adjustment]
4681
Displays the gain value of the amplifiers on the controller for Green.
001 Factory Setting: GE Color
002 Factory Setting: GO Color
[Gain Adjustment]
4682
Displays the gain value of the amplifiers on the controller for Blue.
001 Factory Setting: BE Color
002 Factory Setting: BO Color
[DF: Density Adjustment]
4688
Adjusts the white shading parameter when scanning an image with the ARDF.
Adjusts the density level if the ID of outputs made in the DF and Platen mode is different.
001 -
[White Level Peak Read]
4690
Displays the peak level of the white level scanning.
001 RE
002 RO
[White Level Peak Read]
4691
Displays the peak level of the white level scanning.
001 GE
002 GO
[White Level Peak Read]
4692
Displays the peak level of the white level scanning.
*ENG
*ENG
[0 to 1023 / 0 / 1 digit/step]
*ENG
*ENG
[0 to 1023 / 0 / 1 digit/step]
*ENG
*ENG [50 to 150 / 104 / 1%/ step ]
-
[0 to 1023 / 0 / 1 digit/step]
-
-
[0 to 1023 / 0 / 1 digit/step]
-
System Service Mode
8
289