Ricoh MPC 2800 AT-C2 Mode D'emploi page 461

No. Type
Replace the mother board
Value of the SSCG register is incorrect.
[50B2] • Check for loose connections at the mother board.
Replace the mother board
No. Type
IEEE1394 interface error
The 1394 interface is unusable.
• Defective IEEE1394
CTL
851
• Defective controller.
B
1. Turn the main switch off and on.
2. Replace the IEEE1394 interface board.
3. Replace the controller.
No. Type
Wireless LAN card not detected
The wireless LAN card is not detected before communication is established, though
CTL
the wireless LAN board is detected.
853
B
• Loose connection
Check the connection.
No. Type
Wireless LAN/Bluetooth card not detected
The wireless LAN/Bluetooth card is not detected after communication is established,
CTL
but the wireless LAN board is detected.
854
B
• Loose connection
Check the connection.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC Tables
3
93