Ricoh MPC 2800 AT-C2 Mode D'emploi page 605

006 Execution Flag: M
007 Execution Flag: C
008 Execution Flag: Y
009 Prohibition
[Toner Replenishment Mode] DFU
3022
Specifies the toner supply time for each color in the toner supply mode.
001 Number: Bk
002 Number: M
003 Number: C
004 Number: Y
005-008 Sets the execution flag for the toner supply mode for each color.
005 Execution Flag: Bk
006 Execution Flag: M
007 Execution Flag: C
008 Execution Flag: Y
3041 [Process Control Type]
Voltage Control
001
Enables or disables potential control.
002 LD Power Control
*ENG
0: Flag OFF, 1: Flag ON
This flag is cleared after executing TD sensor
*ENG
initialization.
*ENG
Enables or disables developer initialization.
DFU
*ENG
[0 or 1 / 0 / 1/step]
0: Enable, 1: Disable
*ENG [0 to 30 / 8 / 1 sec/step]
*ENG
*ENG [0 to 30 / 6 / 1 sec/step]
*ENG
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: Flag OFF, 1: Flag ON
This flag is cleared after executing TD sensor
*ENG
initialization.
*ENG
[0 or 1 / 1 / 1/step ] Alphanumeric
0: FIXED (Use the fixed values for the charge DC bias
*ENG and development DC bias set with SP2-005 and
SP2-229.)
1: CONTROL
[0 or 1 / 1 / 1/step] Alphanumeric
*ENG
0: FIXED (at the value in SP2221-xxx)
System Service Mode
8
237