Ricoh MPC 2800 AT-C2 Mode D'emploi page 649

Use to remove "jaggies" if they appear. Set higher for smoother images.
Brightness: 1–255
-007
Set higher for darker, set lower for lighter.
Contrast: 1–255
-008
Set higher for more contrast, set lower for less contrast.
Independent Dot Erase (0), 1-7 (Strong)
Selects the contrast level for B/W the Text mode. Sets the erasure level of Irregular Dots. Set
-009
higher for stronger effect, lower for weaker effect.
0: Not activated
Texture Erase: 0
Sets the erasure level of textures. Set higher for stronger effect, lower for weaker effect. This
-010
SP (suffix "-010") only exists in SP4580, 4582 and 4583.
0: Not activated
4581 [FAX Application: Text] DFU
4584 [FAX Application: Original 1] DFU
4585 [FAX Application: Original 2] DFU
MTF: 0 (Off), 1-15 (Strong)
-005
Sets the MTF level (Modulation Transfer Function) designed to improve image contrast. Set
higher for stronger effect, lower for weaker effect.
Smoothing: 0 (x1), 1-7 (Strong)
-006
Use to remove "jaggies" if they appear. Set higher for smoother images.
Brightness: 1–255
-007
Set higher for darker, set lower for lighter.
Contrast: 1–255
-008
Set higher for more contrast, set lower for less contrast.
-009 Independent Dot Erase (0), 1-7 (Strong)
*ENG [1 to 255 / 128 / 1 /step]
*ENG [1 to 255 / 128 / 1 /step]
*ENG
*ENG [0 to 2 / 0 / 1 /step]
*ENG
*ENG
*ENG [1 to 255 / 128 / 1 /step]
*ENG [1 to 255 / 128 / 1 /step]
*ENG
System Service Mode
[0 to 7 / 0 / 1 /step]
[0 to 15 / 8 / 1 /step]
0: MTF Off
[0 to 7 / 4 / 1 /step]
[0 to 7 / 0 / 1 /step]
8
281