Ricoh MPC 2800 AT-C2 Mode D'emploi page 700

8. Appendix: SP Mode Tables
083 Format Copy B&W Other
084 Format for Printer Color
085 Format for Printer B&W
086 Format for Printer B&W HQ
Default for JPEG
Sets the JPEG format default for documents sent to the document management server via
091
the MLB with JPEG selected as the format.
Enabled only when optional MLB (Media Link Board) is installed.
101 Primary srv IP address
8
102 Primary srv scheme
103 Primary srv port number
104 Primary srv URL path
111 Secondary srv IP address
112 Secondary srv scheme
113 Secondary srv port number This is basically adjusted by the remote system.
114 Secondary srv URL path
120 Default Reso Rate Switch
Reso: Copy (Color)
121
Selects the resolution for color copy mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 300dpi/ 2: 150dpi/ 3: 75dpi
332
2: TIFF/MH, 3: TIFF/MR
0: JFIF/JPEG, 1: TIFF/MMR,
2: TIFF/MH, 3: TIFF/MR
0: JFIF/JPEG, 1: TIFF/MMR,
2: TIFF/MH, 3: TIFF/MR
• This SP is not used in this model.
0: JFIF/JPEG, 1: TIFF/MMR,
2: TIFF/MH, 3: TIFF/MR
0: JFIF/JPEG, 1: TIFF/MMR,
2: TIFF/MH, 3: TIFF/MR
[5 to 95 / 50 / 1 /step]
Sets the IP address for the primary capture server. This is
basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
Sets the IP address for the secondary capture server. This is
basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
[0 to 3 / 2 / 1/step]