Ricoh MPC 2800 AT-C2 Mode D'emploi page 568

8. Appendix: SP Mode Tables
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2401 is multiplied by these SPs values.
2421
• The paper leading edge area can be adjusted with SP2422.
005 Separation DC: Plain: 1st Side
Separation DC: Plain: 2nd
006
Side
Separation DC: 1200: 1st
007
Page
Separation DC: 1200: 2nd
008
side
[Plain: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2422
paper leading edge between the erase margin area and the image area.
Plain: 154 mm/sec, 1200: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
8
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
004 Paper Transfer: 1200: 2nd side
005 Separation DC: Plain: 1st Page
006 Separation DC: Plain: 2nd Page
007 Separation DC: 1200: 1st Page
008 Separation DC: 1200: 2nd side
[Plain: Trailing Edge Correction] Plain Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
2423
edge in each mode. SP2403 and SP2407 are multiplied by these SP values.
Plain: 154 mm/sec, 1200: 77 mm/sec
200
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG