Ricoh MPC 2800 AT-C2 Mode D'emploi page 822

8. Appendix: SP Mode Tables
6161 17 Bank2: Feed Motor:242mm/s
6161 21 Bank2: Feed Motor:154mm/s
6161 22 Bank2: Feed Motor:115mm/s
6161 23 Bank2: Feed Motor:77mm/s
6161 25 Bank1:Tray Lock Solenoid
6161 26 Bank2:Tray Lock Solenoid
6161 30 Bank:Tray3: PU Solenoid
6161 31 Bank:Tray4: PU Solenoid
6161 32 Bank:Tray5: PU Solenoid
6161 35 Bank:Tray3: Feed Clutch
6161 36 Bank:Tray4: Feed Clutch
6161 37 Bank:Tray5: Feed Clutch
Test Pattern Printing
8
Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used primarily for design
testing.
• Do not operate the machine until the test pattern is printed out completely. Otherwise, an SC occurs.
1. Enter the SP mode and select SP2-109-003.
2. Enter the number for the test pattern that you want to print and press [#].
3. When you want to select the single color of Magenta, Yellow or Cyan for printing a test pattern, select
the color with SP2-109-005 (2: Magenta, 3: Yellow, 4: Cyan).
4. When you want to change the density of printing a test pattern, select the density with SP2-109-006
to -009 for each color.
• If you select "0" with SP2-109-006 to -009, the color to be adjusted to "0" does not come up
on a test pattern.
454
(D351/ D352/D387)
Feed Motor:242mm/s (D353)
Feed Motor:154mm/s (D353)
Feed Motor:115mm/s (D353)
Feed Motor:77mm/s (D353)
Tray Lock Solenoid (D351/ D352 or D387)
Tray Lock Solenoid (D353)
Pick-up Solenoid (D351/ D352 or D387)
Pick-up Solenoid (D351/ D353)
Pick-up Solenoid (D353)
Pick-up Solenoid (D351/ D352 or D387)
Pick-up Solenoid (D351/ D353)
Pick-up Solenoid (D353)