Ricoh MPC 2800 AT-C2 Mode D'emploi page 665

Specifies whether the counter is double clicked for A3/DLT size prints.
When you have to change this SP, ask your supervisor.
5104 1 Double Count
5104* A3/DLT Double Count (SSP)
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except from the bypass
tray. When "Yes" is selected, A3 and DLT paper are counted twice, that is A4 x2 and LT
x2 respectively.
5112 [Non-Std. Paper Sel.] Non-Standard Paper Selection
Determines whether a non-standard paper size can be input for the universal cassette trays
(Tray 2, and Optional paper tray unit trays 1 and 2)
[0 or 1/ 0 / - ]
001
0: OFF
1: ON, If "1" is selected, the customer will be able to input a non-standard paper size using
the UP mode.
5113 [Optional Counter Type]
Default Optional Counter
001
Type
External Optional Counter
002
Type
[0 to 2 / 0 / 1 /step]
0: NO (Normal count)
*CTL
1: YES (Double count)
2: YES except By-pass (Normal count for unknown
size)
This program specifies the counter type.
0: None, 1: Key card (RK 3, 4)
2: Key card (down), 3: Prepaid card
*CTL
4: Coin rack, 5: MF key card
8: Key counter + Vendor
9: Bar-code Printer
This program specifies the external counter type.
0: None
*CTL 1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
System Service Mode
8
297