Ricoh MPC 2800 AT-C2 Mode D'emploi page 464

3. Appendix: Service Call Conditions
No. Type
No. Type
3
CTL
860
B
No. Type
CTL
861
D
No. Type
CTL
863
D
96
Details (Symptom, Possible Cause, Troubleshooting Procedures)
• Same as SC863
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: Initialization error
The controller detects that the hard disk fails.
• HDD not initialized
• Defective HDD
1. Reformat the HDD.
2. Replace the HDD.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: Reboot error
The HDD does not become ready within 30 seconds after the power is supplied to
the HDD.
• Loose connection
• Defective cables
• Defective HDD
• Defective controller
1. Check the connection between the HDD and controller.
2. Check and replace the cables.
3. Replace the HDD.
4. Replace the controller.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: Read error
The data stored in the HDD cannot be read correctly.
• Defective HDD
• Defective controller
1. Replace the HDD.