Line Position Adjustment Result - Ricoh MPC 2800 AT-C2 Mode D'emploi

4. Appendix: Process Control Error Conditions
Vsg Adjustment Result
SP3-325-001 to -010 (Vsg Adjustment Result)
No. Result
1 O.K
4
ID sensor
2 adjustment
error
ID sensor
3
output error
Vsg
9 Adjustment
error

Line Position Adjustment Result

SP2-194-010 to -012 (Line Position Adjustment Result: M, C, Y)
This SP shows the number as a line position adjustment result on the LCD. It shows which color has an error
(M, Y or C).
110
Description Possible Causes/Action
Vsg adjustment is
-
correctly done.
• Dirty ID sensor (toner, dust, or foreign material)
• Dirty transfer belt
• Scratched image transfer belt
• Defective ID sensor
• Poor connection
• Defective IOB
Vsg cannot be
adjusted within 4.0
1. Clean the ID sensor.
±0.5V.
2. Check the belt cleaning. Clean or replace the transfer
3. Replace the image transfer belt.
4. Replace the ID sensor.
5. Check the connection.
6. Replace the IOB board.
• Defective ID sensor
• Poor connection
ID sensor output is
• Defective IOB
more than "Voffset
Threshold" (SP3-32
1. Replace the ID sensor.
4-004)
2. Check the connection.
3. Replace the IOB board.
Vsg adjustment has
• Other cases
not been
Retry SP3-321-010.
completed.
belt.