Ricoh MPC 2800 AT-C2 Mode D'emploi page 766

8. Appendix: SP Mode Tables
8 06x 2 Stack
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
8 06x 6 Punch
8 06x 7 Other
8 071
8 072
8
8 073
8 074
8 075
8 076
8 077
398
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in staple mode,
the Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode and set
for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for a print job,
the P: counter increments. (See SP8 064 6.)
Reserved. Not used.
T:Jobs/PGS
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
C:Jobs/PGS
These SPs count and calculate the number of copy jobs by size based on the number
of pages in the job.
F:Jobs/PGS
These SPs count and calculate the number of fax jobs by size based on the number of
pages in the job.
P:Jobs/PGS
These SPs count and calculate the number of print jobs by size based on the number of
pages in the job.
S:Jobs/PGS
These SPs count and calculate the number of scan jobs by size based on the number
of pages in the job.
L:Jobs/PGS
These SPs count and calculate the number of jobs printed from within the document
server mode window at the operation panel, by the number of pages in the job.
O:Jobs/PGS
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]