Ricoh MPC 2800 AT-C2 Mode D'emploi page 588

8. Appendix: SP Mode Tables
• The paper leading edge area can be adjusted with SP2772.
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 1200: 1st Side
[Special 1: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2772
paper leading edge between the erase margin area and the image area.
Plain: 154 mm/sec, 1200: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
8 007 Separation DC: 1200: 1st Side
[Special 1: Trailing Edge Correction] Special 1 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2753 and SP2757 are multiplied by these SP values.
2773
Plain: 154 mm/sec, 1200: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2774.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
220
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 50 / 0 / 1 mm/step]
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG