Ricoh MPC 2800 AT-C2 Mode D'emploi page 679

172 Interval :HLT
5508* [CC Call]
Jam Remains
001*
Enables/disables initiating a call for an unattended paper jam.
Continuous Jams
002*
Enables/disables initiating a call for consecutive paper jams.
Continuous Door Open
003*
Enables/disables initiating a call when the front door remains open.
Jam Detection: Time Length
011*
Sets the time a jam must remain before it becomes an "unattended paper jam". This setting
is enabled only when SP5508-004 is set to "1".
Jam Detection: Continuous Count
012*
Sets the number of consecutive paper jams required to initiate a call. This setting is enabled
only when SP5508-004 is set to "1".
Door Open: Time Length
013*
Sets the length of time the door remains open before the machine initiates a call.
This setting is enabled only when SP5-508-004 is set to "1".
[SC/Alarm Setting]
With NRS (New Remote Service) in use, these SP codes can be set to issue an SC call when
5515
an SC error occurs. If this SP is switched off, the SC call is not issued when an SC error
occurs.
001 SC Call
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
006 Communication Test Call
*CTL -
0: Disable, 1: Enable
0: Disable, 1: Enable
0: Disable, 1: Enable
[3 to 30 / 10 / 1 minute /step]
[2 to 10 / 5 / 1 /step]
[3 to 30 / 10 / 1 /step]
*CTL -
[0 or 1 / 1 / - ]
0: Off
1: On
[0 or 1 / 1 / - ]
0: Off
System Service Mode
8
311