Ricoh MPC 2800 AT-C2 Mode D'emploi page 704

8. Appendix: SP Mode Tables
Adjusts the USB transfer rate.
002 Vendor ID
003 Product ID
004 Device Release Number
[Delivery Server Setting]
5845
Provides items for delivery server settings.
FTP Port No.
001
Sets the FTP port number used when image files to the Scan Router Server.
IP Address (Primary)
002
Use this SP to set the Scan Router Server address. The IP address under the transfer tab can
be referenced by the initial system setting.
Delivery Error Display Time
Use this setting to determine the length of time the prompt message is displayed when a
006
test error occurs during document transfer with the NetFile application and an external
8
device.
IP Address (Secondary)
Specifies the IP address assigned to the computer designated to function as the secondary
008
delivery server of Scan Router. This SP allows only the setting of the IP address without
reference to the DNS setting.
Delivery Server Model
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
009
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr Capability
010
Changes the capability of the registered that the I/O device registered.
336
*CTL Displays the vendor ID. DFU
*CTL Displays the product ID. DFU
Displays the development release version number.
*CTL
DFU
*CTL -
[0 to 65535 / 3670 / 1 /step]
Range: 000.000.000.000 to 255.255.255.255
[0 to 999 / 300 / 1 second /step]
Range: 000.000.000.000 to 255.255.255.255
[0 to 4/ 0 / 1 /step]
[0 to 255 / 0 / 1 /step]