Ricoh MPC 2800 AT-C2 Mode D'emploi page 683

018 SRM Memory Check
019 LCS
020 Web Uapli
021 ECS
[Free Run]
Performs a free run on the copier engine.
5802
• The machine starts free run in the same condition as the sequence of A4/LT, A3 or
A4 SEF printing from the 1st or 2nd tray. Therefore, the correct paper should be
loaded in the 1st tray or 2nd tray, but paper is not fed.
• The main switch has to be turned off and on after using the free run mode for a test.
001 TRAY1: A4LEF: FC
002 TRAY2: A3: FC
003 TRAY2: A4SEF: FC
5803 [Input Check]
5804 [Output Check]
5805 [Anti-Condensation Heater]
002 0:OFF / 1:ON
[SC Reset]
Resets a type A service call condition.
5810
• Turn the main switch off and on after resetting the SC code.
001 Fusing SC Reset
5811 [Machine Serial] Machine Serial Number Display
002 Display
Initializes the SRM (System Resource Manager) settings.
Initializes the LCS settings.
Initializes the web user application settings.
Initializes the ECS settings.
-
- -
-
- See "Input Check Table" in this section.
- See "Output Check Table" in this section.
*ENG [0 or 1 / 0 / -]
- -
Displays the machine serial number.
System Service Mode
8
315