Ricoh MPC 2800 AT-C2 Mode D'emploi page 823

5. When you are prompted to confirm your selection, touch "Yes" to select the test pattern for printing.
6. Touch "Copy Window" to open the copy window, then select the settings for the test print (paper size
etc.).
• If you want to use black and white printing, touch "Black & White" on the LCD. If you want to
use color printing, touch "Full Colour" on the LCD.
7. Press the "Start" key to start the test print.
8. After checking the test pattern, touch "SP Mode" on the LCD to return to the SP mode display.
9. Reset all settings to the default values.
10. Touch "Exit" twice to exit SP mode.
No.
0 None
1 Vertial Line (1dot)
2 Vertial Line (2dot)
3 Horizontal Line (1dot)
4 Horizontal Line (2dot)
5 Grid Vertical Line
6 Grid Horizontal Line
7 Grid Pattern Small
8 Grid Pattern Large
9 Argyle Pattern Small
10 Argyle Pattern Large
Pattern No. Pattern
11 Independent Pattern (1-dot)
12 Independent Pattern (2-dot)
13 Independent Pattern (4-dot)
14 Triming Area
16 Tooth Check (Horizontal)
17 Band (Horizontal)
18 Band (Vertical)
19 Checker Flag Pattern
20 Grayscale (Vertical Margin)
21 Grayscale (Horizontal Margin)
23 Full Dot Pattern
System Service Mode
8
455